Detener primero
Ante temperatura, hardware, energía o botón STOP, no fuerce escaneos repetidos.
ULTHERAPY PRIME
Guía de códigos Ultherapy
Códigos Ultherapy comunes, causas posibles y primeras revisiones para documentar fallos y solicitar reparación.
Enviar consulta
Registrar código
Fotografíe la pantalla y registre código, modelo de transductor, líneas restantes y pasos.
Revisar accesorios
Pieza de mano, transductor, USB, ventilación y contacto son puntos iniciales comunes.
CÓDIGOS DE MENSAJE
Códigos Ultherapy comunes
Referencia inicial. No sustituye IFU, manual ni revisión in situ. Si el error se repite, detenga el uso.
| Code | Área | Posible significado | Primera revisión |
|---|---|---|---|
| B | Pieza de mano | Internal handpiece temperature is too high. | Pause use and let the handpiece cool down; check for long continuous operation or poor ventilation. |
| C | Unidad de control | The control unit detected a hardware event and stopped. | Restart as instructed on screen; if it repeats, record the code and arrange inspection. |
| E | Comunicación | Communication halted during initialization. | Restart the system and confirm the boot process completes; avoid power loss or removing accessories mid-process. |
| G | Unidad de control | The control unit detected a hardware event and stopped. | Restart and observe whether it recurs; keep context and photos if it does. |
| H | Transductor | Transducer motion was not detected. | Stop scanning first, then remove and reinsert the transducer; confirm it is latched into the handpiece. |
| I | Comunicación | The control unit detected a communication event. | Restart and observe; if accompanied by handpiece or transducer issues, record accessory status. |
| J | Pieza de mano | Handpiece communication halted. | Restart and check whether the handpiece cable and port are secure. |
| K | Software | Software halted due to an event. | Restart the system; if it persists, avoid repeated attempts and arrange inspection. |
| L | Transductor | The transducer has no remaining lines. | Replace the transducer before continuing; record the model and remaining-line status. |
| M | Pieza de mano | Handpiece motion halted. | Check that the handpiece and transducer are correctly installed and locked; reinstall and test again. |
| N | USB | USB drive connection or read/write issue. | Confirm USB format, free space, and insertion status; do not remove it during system read/write. |
| P | Unidad de control | The control unit detected a hardware event and stopped. | Restart; if it persists, record the code and arrange hardware inspection. |
| S | Parada de emergencia | The red STOP button was pressed. | Confirm STOP button status, rule out accidental press, then restart as instructed. |
| T | Transductor | Internal transducer temperature is too high. | Pause use and let the transducer cool; use another transducer if needed. |
| U | Unidad de control | Internal control unit temperature is too high. | Check ambient temperature and ventilation; let the main unit cool before testing again. |
| V | Entrega de energía | Energy delivery halted, possibly due to excessive reflected power. | Resume scanning as instructed; if it repeats, try another transducer and arrange inspection. |
| W | Transductor | The transducer is unauthorized or not accepted by the system. | Replace with a transducer suitable for the device; do not force continued operation. |
| X | Transductor | The system cannot read the transducer. | Remove and reinsert the transducer; check that the contact area is clean and dry. |
TRANSDUCER CHECK
Para errores de transductor, revise primero contacto y bloqueo
H, L, M, T, V, W y X suelen relacionarse con transductor, pieza de mano o energía. Fotografíe contacto, bloqueo, líneas y código.
THERMAGE FLX MANUAL NOTES
Notas rápidas Thermage FLX
- When a Thermage FLX system error appears, record the code and screen message first, then follow on-screen instructions.
- If the activation button does not respond, confirm the handpiece is connected and the footswitch has not taken over activation control.
- If the touchscreen does not accept touches, press the center of the button and check whether the screen is locked.
- If the return pad heats up, stop operation and check pad placement and cable connection before continuing.
- If the handpiece overheats abnormally or the device has visible physical damage, stop use and arrange professional inspection.
REFERENCE IMAGES
Imágenes originales de códigos
Imágenes conservadas para comprobación manual; use la tabla HTML superior para lectura normal.
El resumen se basa en los documentos aportados y solo sirve para revisiones iniciales y comunicación de reparación.